Name: PowerCut™ Guide Bar, 42"
SKU: 423RNFD009

Chargement en cours...

Trouver un Détaillant Local

Liens rapides :

Caractéristiques, détails et support

Guide-chaîne solide pour le bûcheron professionnel. Le nez à pignons remplaçables élimine la nécessité de devoir acheter une nouvelle barre.

Détails du produit

Le nez à pignon remplaçable élimine la nécessité de devoir acheter une nouvelle barre
Le nez se fixe avec un simple rivet et est retenu en place par de larges oreilles robustes pour faciliter son remplacement.
Le long nez supporte le gros de la tâche, tandis que la barre présente moins d’usure
Rails robustes présentant une excellente résistance à l’usure et à l’écaillage
Pas : 0,404 po, Calibre : 0,063 po, nombre de maillons-guides de chaîne coupante : 122
S’adapte aux produits Husqvarna, Solo et autres. Pour de plus amples renseignements, veuillez consulter le localisateur de pièces.

Caractéristiques, détails et support

Guide Bar
Product Family	PowerCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.063"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	122.0
Bar Length	42"
Tail Mount	D009
Guide Bar Code	RNF
Guard Mate Compatible	Non
Intenz	Non
Narrow Kerf	Non
Bar Nose Radius	Large
Sprocket Nose Tooth Count	10.0

General
Color	Grey
Volume	0.95 dm³
Product UOM	Each
Weight (with Packaging)	6.9 Lb

Retour au début