Name: VersaCut™ Guide Bar, 18"
SKU: 188VXLHD024

This product has been discontinued. To see if there’s a substitution that meets your needs, please contact Technical Services at 800-223-5168 or use our Part Finder.

Quick Links:

Specifications, Details & Support Model Fit Guide

The Oregon 188VXLHD024 18" VersaCut Guide Bar allows arborists, orchardists and other professionals to cut any type of tree, shrub or limb. This standard-kerf chainsaw bar features a large radius nose featuring an all new bearing-grade steel sprocket assembly for a longer nose life and better performance. Better chain fit-up decreases the rail wear rate and makes your cuts more precise. The bar weighs 20% than Oregon Pro-Lite bars, thanks to a new aluminum core designed to reduce operator fatigue. The Oregon 188VXLHD024 VersaCut Guide Bar fits certain Jonsered chain saws. Check the fit guide to see if this bar will work with your saw.

Product Details

More precise cutting from a stiffer bar
Provides better balance on smaller saws
Lighter weight means less fatigue
Longer nose life and better performance with a new sprocket nose system
Reduced rail wear and more precise cutting via better chain fitup
Pitch: 3/8", Gauge: .058", chain drive link count: 68
Fits Jonsered, Efco, Oleo-Mac and others, see Oregon® selector guide

Specifications, Details & Support

Guide Bar
Product Family	VersaCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.058"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	68.0
Bar Length	18"
Tail Mount	D024
Guide Bar Code	VXL
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	No
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12.0

General
Color	Medium Grey
Product UOM	Each
Weight (with Packaging)	2.54 Lb

Light-Weight Professional Guide Bars

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at support@oregonproducts.com

Product Details

Fit Guide

Efco

Ikra

Jonsered

Oleo Mac

Partner