Name: Oregon 80cm Harvester Bar, Solid Nose .404" .080" ga (802HSFN104)
SKU: 802HSFN104

Oregon 80cm Harvester Bar, Solid Nose .404

This product is only available through retailers or servicing dealers.

Find a Local Dealer

Quick Links:

Specifications, Details & Support

Faster. Stronger. Longer Lasting. Oregon solid harvester (Sprocket nose) guid bar delivers superior performance in demanding, high-speed conditions. This bar resists chipping and features outstanding springback. High-grade alloy-steel material and induction-hardened bar rails make it tough and durable.

Product Details

Made from high grade alloy-steel material for durability and long wear capablities
Induction hardened rails offer superior resistance to rail wear and chipping
Large diameter nose rivets reduce the risk of rail spreading at the nose
Engineered to match harvester powerheads for maximum performance
Our straight and square-milled grooves are designed for consistency, stability, and decreased wear
Image shown may not reflect actual bar tail motor mount, check Oregon Harvester Catalog for actual tail mount configurations

Specifications, Details & Support

Harvester Guide Bars
Product Family	Harvester
Guide Bar Code	HS
Bar Length	80.0 cm
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	93.0
Tail Mount	N104

General
Color	Yellow
Volume	0.66 dm³
Product UOM	Each
Weight (with Packaging)	3.67 kg
Net Weight Carton	38.75 Lb

Oregon 80cm Harvester Bar, Solid Nose .404" .080" ga (802HSFN104)

Product Details

Specifications, Details & Support

Related Products

Oregon Harvester Nose Kit, Solid Bar 404" .080 ga (101918)