Guide-chaîne SpeedMax, 0,404", RSN, 90 cm

Chargement en cours...

Liens rapides :

Caractéristiques, détails et support Guide de sélection par Marques et Modèles

Maximize efficiency through even the toughest conditions. The Oregon SpeedMax™ XL Anti-Vibe guide bar features a thicker steel-alloy body designed to increase rigidity and reduce bar movement when cutting hard, frozen, or gnarly wood. With precision-milled rails that are induction-hardened for superior durability, it’s a perfect match for Oregon® saw chain. The bar also features an easy-to-replace, 14-tooth sprocket nose and the built-in LubriTec™ Oiling System to keep high-friction areas well lubricated. All of which translates to straighter cuts, reduced wear, and less downtime.

Détails du produit

Made from high-grade alloy steel, known for its toughness and durability, developed specifically for high-performance applications
5% thicker steel (than SpeedMax™ XL bars less than 80 cm) provides additional rigidity, limiting unwanted bar movement when cutting
Bar stops moving 4% faster than original SpeedMax™ XL bars (80 cm and longer)
Induction-hardened rails undergo an electromagnetic heat-treat process for superior resistance to wear and chipping
Precision-milled bar groove and rails match Oregon® saw chain specifications to maintain straight cuts and prevent binding
LubriTec™ Oiling System keeps high-friction areas well lubricated to reduce wear and extend chain and bar life
Jet-Fit® Tail Mount with patented tail slots makes fitting simple, reducing bar change-out time to seconds
Signature yellow powder-coat finish provides superior rust-resistance and greater visibility
Limited Warranty — Oregon Tool, Inc. warrants its products to be free from defects in materials and workmanship for as long as it is owned by the original consumer purchaser.

Caractéristiques, détails et support

Guide-chaînes pour abatteuses
Famille de produit	SpeedMax XL
Code de guide-chaîne	SMR
Longueur du guide	91.44 cm
Pas de chaîne Pas de chaîne Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Jauge Jauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Nombre de maillons entraineurs Nombre de maillons entraineurs The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	101.0
Queue	Q149

Général
Volume	234.95 in³
FEO du produit	Each
Poids (avec l’emballage)	9.85 Lb
Net Weight Carton	0.0 Lb

Guide de sélection par Marques et Modèles

Need Help? Contact Customer Service at 04 78 79 48 48 or email us at contact.fr@oregontool.com

Guide

Retour au début

Détails du produit

Guide

Blockbuster

Hultdins

Logmax

Rottne

TIMBER KING

TREEKING

Waratah